Multifunctional coating machine

1. Width:180-420cm
2. Mechanical speed: 5-65m/min(50HZ)
3. Heating source: conduction oil, gas, steam
4. Drive mode: horizontal roller chain
5. Total Power: ≈48KW

ur company is developing coating machine from 2003, according to customers’ requirement we are constantly updating technology and perfecting service. Recently we launched newest multi-coating machine, not only can satisfy the customers’ diversified demands on process, also greatly reduce the energy consumption and create more economic benefits.
This machine can be used in the fabric of uniform coating, special feel, breathable moisture permeability and other functionality. Including colorful PVC, epoxy resin and other industrial fabric’s coating. The machine is automatic, temperature uniformity, thickness is adjustment, with brakes and digital display, easy and simple to handle, greatly reduce the requirements for operators.

Process flow and selection of accessories

 

1、Feeding→2、auto centering→3、double-roller or three-roller padder (optinal)→4、four-roller ironing（optional）→5、roller coating（optional）→6、high precision coating head→7、hot-air oven→8、cooling device（optional）→9、three-roller cooling→10、big package or cropping（optional）


Throughput frame

 



Mode 1
  


A-1 Frame A-2 Throughput feeding and stretching 
A-3 Photoelectric centering unit A-4 Fluff scrubbing unit 
A-5 Edge vacuum cleane A-6 Nose box contorl cabinet
   

 



Mode 2
  


A-1 Frame A-2 Throughput feeding and stretching
A-3 Photoelectric centering unit A-4 Realtime monotoring control
A-5 MH563-high rolling mill A-6 Edge vacuum cleaner
A-7 Nose box contorl cabinet  

 

 


Priming(table coating)

 



Set-up mode 1
  


B-1 Pneumatic variable lifting scraper B-2 Lifting board
B-3 Throughput guide roller B-4 Width-stretching aluminium roller
B-5 Throughput guide roller B-6 Throughput guide roller



Set-up mode 2
  


B-1 Pneumatic lifting scraper with trimming control B-2 Scraper lifting limit
B-3 Automated starch blocking unit B-4 Lifting board(variable height control)
B-5 Throughput guide roller B-6 Width-stretching aluminium roller
B-7 Throughput guide roller B-8 Constant stretch testing unit
B-9 Throughput guide roller B-10 Throughput guide roller
B-11 Constant-strech throughput feeding unit  

 

 
B-1 Pneumatic lifting scraper with trimming control B-2 Scraper lifting limit
B-3 Automated starch blocking unit B-4 Lifting board(variable height control)
B-5 Throughput guide roller B-6 Width-stretching aluminium roller
B-7 Throughput guide roller B-8 Constant stretch testing unit
B-9 Throughput guide roller B-10 Throughput guide roller
B-11 Back scraper(variable height control) B-12 Constant-strech throughput feeding unit

 

 
B-1 Pneumatic lifting scraper B-2 Automated starch blocking unit
B-3 Lifting board(variable height control) B-4 Throughput guide roller
B-5 Width-stretching aluminium roller B-6 Throughput guide roller
B-7 Constant stretch testing unit B-8 Throughput guide roller
B-9 Throughput guide roller B-10 Constant-strech throughput feeding unit
B-11 Power supply for trimming units B-12 Digtal remote sensor
B-13 Trimming shaft B-14 Back Vane

 

 

 

B-1 Vtol control cylinder B-2 Rubber pressing roller
B-3 Glued pattern roller B-4 Throughput guide roller
B-5 Width-stretching aluminium alloy rooler

 


Throughput feeding nose box
C-1 Nose box C-2 Throughput guide roller
C-3 Throughput edge tracking controller C-4 Pressing needle(pneumatic)
C-5 Throughput edge tracking unit  
Heated air circulation drying chamber
D-1 Heated air circulation system D-2 Temperature holding board
D-3 Frame D-4 Cable trough
D-5 Circulated air flow control D-6 Exhaust flow control
D-7 Exhaust manifold D-8 Draft jet pipe
D-9 Rail D-10 Heat exchanger

 

Rail width control

Technical Performance

Different sections of rail articulated in such a way as to allow shaft transmission under matched adjustment of nuts controlled by a width-modulating decelerator.This arrangement will make sure that every sections allow either synchronized or separate control.The values of width will be shown on the screen in the nose box control cabinet.
Every level of width is of foolproof design to avoid all the risks of being out of range.

 

Leaves the cloth rack


Mode 1
  


G-1 Throughput diacharging box G-2 Gear box
B-3 Throughput guide roller B-4 Synchronized control
B-5 Cooling roller(2 or 3 roll) B-6 Heavy coil charging
G-7 A-shaped coller frame  

 



Mode 2
  


G-1 Throughput diacharging box G-2 Gear box
B-3 Throughput discharging/guiding roller G-4 Synchronized control
G-5 Cooling roller(2 or 3 roll) G-6 Heavy coil charging
G-7 A-shaped coller frame G-8 Throghput diacharging roller
G-9 Throghput swinging  

 

Leaves the cloth rack

 

 

Coating machine size & parameters

 

Coating machine size & parameters
  

 

 

 

CHAMBER MAIN DRIVE（KV） HEATER CIRCULATION FAN MOTOR OVEN LENGTH(L) TOTAL LENGTH(L)
18.5 4 8 SETS 3.0~4.0KW×4 SETS 18015 31500
18.5 5 10 SETS 3.0~4.0KW×10 SETS 22015 35500

NOTES:

1.B is referred to as nominal width (180cm、200cm、220cm、240cm、260cm、280cm、300cm、320cm、340cm、360cm、380cm、400cm、420cm)
2.The above parameters vary depending on customers' situation.This company reserves the rights for revision.

 

 

Application examples
  

 

 

Attached components
  

 

Throughput edge tracking unit

If features A/C rake drive, infrared and frequency inverting control,allowing realtime edge monitoring operation even at ahigh throughput rate.


 

Control valve

The oven at each zone is fitted with a set of kerosene-fueled proportional temperature control valves.It features accurate temperature control,allowing you to predetermine working temperatures desired whenever you like.

Automated time rail of filler
simple oiling unit
   

 

Easy-to-damage components
  

 

Needle mount,chain,needle board